Potassium fluoride,anhydrous
           Potassium fluoride,extra pure
           Potassium fluoride,Granular
           Silicon Dioxide
           Hydrofluoric acid
           Synthetic Cryolite
           Potassium Fluoaluminate
           Ammonium bifluoride
           Potassium Bifluoride
           Aluminium fluoride
           Sodium fluoride
           Potassium Fluorosilicate
           Fluorosilicic Acid
           Sodium silicofluoride
           Potassium Hydroxide Flakes
           Magnesium Fluoride
           Magnesium fluorosilicate
           Barium Fluoride
           More
 
  News Center

The direct nickel plating process of AZ91D magnesium alloy was studied by using phosphoric acid and potassium fluoride as the pretreatment pickling formula and basic nickel carbonate as the main salt.

The results show that the Ni-P coating is homogeneous, compact and has no obvious defects. The average deposition rate is about 0.3μm /min. The microhardness value is 4.8GPa and the phosphorus content is 8.56mass%. The pickling step in the pretreatment process causes the magnesium alloy matrix to produce a rough surface, thereby improving the mechanical occlusion between the coating and the substrate, increasing the adhesion of the coating.